Crowned & Flat Cam Followers
Crowned Outer Rings are used to minimize outer ring thrusting in applications where the axis of the cam follower is not parallel to the surface of the track or is skewed relative to the direction of travel. Crowned outer rings are a good selection for use with curved or circular tracks. In well aligned applications, crowned outer rings can cause accelerated track wear.
Cam Followers are presented in five groups: Needle Roller Cam Followers; Caged Roller Followers; RBC Roller®; Long Life Cam Followers; Material Handling Rollers and Sheaves; and Airframe Track Rollers and Needle Bearings. RBC also produces a wide range of custom designed cam followers and track rollers. Designers and users with unusual application requirements should contact RBC to discuss custom designed cam followers.
- series: McGill CFH 1/2 B Crowned & Flat Cam Followers
- McGill
- CFH 1/2 B
- stud length: Osborn Load Runners PLRE-1-3/4 Crowned & Flat Cam Followers
- Osborn Load Runners
- PLRE-1-3/4
- stud length: McGill CFE 11/16 S Crowned & Flat Cam Followers
- McGill
- CFE 11/16 S
- stud type: Osborn Load Runners CFH 4 S Crowned & Flat Cam Followers
- Osborn Load Runners
- CFH 4 S
- roller shape: Koyo NRB CRSBCE-16 Crowned & Flat Cam Followers
- Koyo NRB
- CRSBCE-16
- stud length: INA (Schaeffler) KRV52-PP Crowned & Flat Cam Followers
- INA (Schaeffler)
- KRV52-PP
- eccentric stud diameter: McGill CFE 2 1/2 SB Crowned & Flat Cam Followers
- McGill
- CFE 2 1/2 SB
- roller material: McGill CF 3 1/4 B Crowned & Flat Cam Followers
- McGill
- CF 3 1/4 B
- maximum rpm: McGill MCFRE 22 S Crowned & Flat Cam Followers
- McGill
- MCFRE 22 S
- stud diameter: McGill MCFRE 40 Crowned & Flat Cam Followers
- McGill
- MCFRE 40
- stud diameter: INA (Schaeffler) KRVE26-PP Crowned & Flat Cam Followers
- INA (Schaeffler)
- KRVE26-PP